Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G7 7590 Service Manual

Procedure

CAUTION To avoid damage to the wireless card, do not place any cables under it.
  1. Connect the antenna cables to the wireless card.

    The following table provides the antenna-cable color scheme for the wireless card supported by your computer.

    Table 1. Antenna-cable color scheme

    The following table provides the antenna-cable color scheme for the wireless card supported by your computer.

    Connectors on the wireless cardAntenna-cable color
    Main (white triangle)White
    Auxiliary (black triangle)Black
  2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot.
  3. Align the screw hole of the wireless-card bracket to the screw hole on the system board.
  4. Replace the screw (M2x4) that secures the wireless-card bracket to the wireless card and the system board.
    Image: Replacing the wireless card

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\