Dell Latitude E5470 Owner's Manual

Installing the system board

1. Align the system board with the screw holders on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the speaker cable to the connector on the system and route the cable through the routing channels.
4. Connect the power connector and coin cell battery cables to the connectors on the system board:
5. Install the:
   1. power connector port
   2. dock frame
   3. WLAN
   4. heat sink assembly
   5. WWAN
   6. hard drive assembly or M.2 SSD or PCIe SSD
   7. keyboard
   8. memory module
   9. battery
   10. base cover
   11. SIM card
6. Follow the procedure in After working inside your computer.