Dell EMC SmartFabric OS10 User Guide Release 10.5.1

For managing and troubleshooting purposes, you can assign a router ID for the OSPFv2 process. Use the router’s IP address as the router ID.

• Assign the router ID for the OSPFv2 process in ROUTER-OSPF mode

  router-id ip-address

Assign router ID

OS10(config)# router ospf 10
OS10(conf-router-ospf-10)# router-id 10.10.1.5

View OSPFv2 status

OS10# show ip ospf 10
Routing Process ospf 10 with ID 10.10.1.5
Supports only single TOS (TOS0) routes
It is an Autonomous System Boundary Router
It is Flooding according to RFC 2328
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
   Area (0.0.0.0)
       Number of interface in this area is 3
       SPF algorithm executed 38 times
       Area ranges are