Dell EMC SmartFabric OS10 User Guide Release 10.5.1

To generate DOM alarms, do the following.

1. Enable DOM.

   OS10(config)# dom enable

2. Enable DOM traps.

   OS10(config)# snmp-server enable traps dom

You can run the show alarms command in EXEC mode to view any alarms that are generated.

OS10# show alarms

Index   Severity  Name                   Raise-time              Source
-----   --------  -------------------    ----------------------- ------
0       major     EQM_MEDIA_TEMP_HIGH    Tue 06-04-2019 12:32:07  Node.1-Unit.1

View DOM event log message

The following are examples of event logs:

• High temperature warning:

  Aug 03 06:35:47 OS10 dn_eqm[9135]: [os10:alarm], %Dell EMC (OS10)
  %EQM_MEDIA_TEMP_HIGH: Media high temperature threshold crossed major warning
  SET media 1/1/21 high threshold crossed, 82.00:78.00 Aug 03 06:35:47 OS10
  dn_eqm[9135]: [os10:alarm], %Dell EMC (OS10) %EQM_MEDIA_VOLTAGE_HIGH: Media high
  voltage threshold crossed major warning SET media 1/1/21 high threshold crossed,
  6.00:3.63

  In this example, the threshold for high temperature is 78.00, but the current temperature is 82.00.

• High reception power warning:

  Aug 03 06:35:47 OS10 dn_eqm[9135]: [os10:alarm], %Dell EMC (OS10)
  %EQM_MEDIA_RX_POWER_HIGH: Media high rx_power threshold crossed major warning
  SET media 1/1/21 high threshold crossed, 7.00:3.30 Aug 03 06:35:47 OS10
  dn_eqm[9135]: [os10:alarm], %Dell EMC (OS10) %EQM_MEDIA_BIAS_HIGH: Media high
  bias threshold crossed major warning SET media 1/1/21 high threshold crossed,
  120.00:105.00

  In this example, the threshold for high reception power is 3.30, but the current reception power is 7.00.

View DOM traps

The following are examples of DOM traps.

2018-08-21 17:38:18 <UNKNOWN> [UDP: [10.11.56.49]:51635->[10.11.86.108]:162]:
iso.3.6.1.2.1.1.3.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.4.1.674.11000.5000.100.4.1.3.1.15      iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.4 = INTEGER: 1 iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.5 = INTEGER: 21        iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.1 = INTEGER: 1081393   iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.3 = INTEGER: 1 iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.2 = STRING: "SET media 1/1/21 high threshold crossed, 82.00:78.00"

2018-08-21 17:38:18 <UNKNOWN> [UDP: [10.11.56.49]:48521->[10.11.86.108]:162]:
iso.3.6.1.2.1.1.3.0 = Timeticks: (1) 0:00:00.01 iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.4.1.674.11000.5000.100.4.1.3.1.19      iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.3 = INTEGER: 1 iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.1 = INTEGER: 1081397   iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.4 = INTEGER: 1 iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.2 = STRING: "SET media 1/1/21 high threshold crossed, 6.00:3.63"    iso.3.6.1.4.1.674.11000.5000.100.4.1.3.2.5 = INTEGER: 21