WinPEイメージについて Windows プレインストール環境(WinPE)イメージは、オペレーティングシステムの導入に使用します。SCCM または SCVMM から使用できる WinPE イメージに最新のドライバが含まれていない可能性があるため、アップデートされた WinPE イメージを使用してオペレーティングシステムを導入します。必要なドライバをすべて含む WinPE イメージを作成するには、DTK を使用してイメージをアップデートします。該当するオペレーティングシステム関連のドライバパックが Lifecycle Controller にインストールされていることを確認します。
このタスクについて 注: boot.wim ファイルのファイル名は変更しないでください。
SCCM 用の WIM ファイルの提供
手順 boot.wim ファイルを次の場所 \\shareip\sms_sitecode\OSD\boot\x64\boot.wim からコピーし、 からアクセス可能な共有フォルダに貼り付けます。たとえば、共有パスの場所 \\shareip\sharefolder\boot.wim などです。
SCVMM 用の WIM ファイルの提供 DTKから最新の起動に必要なDellドライバーを挿入するために提供されるBoot.WimPEベース イメージは、SCVMMにPXEサーバーをインストールすることによって生成されます。
手順 サーバに Windows Deployment Server(WDS)ロールをインストールし、PXE サーバを SCVMM に追加します。 サーバでの WDS ロールの追加と、PXE サーバの SCVMM への追加については、Microsoft のマニュアルを参照してください。
boot.wim ファイルを次の場所 C:\RemoteInstall\DCMgr\Boot\Windows\Images にある PXE サーバからコピーします。次に、 がアクセスできる共有フォルダに貼り付けます。たとえば、共有パスの場所 \\shareip\sharefolder\boot.wim などです。
次の手順 WDSおよびPXEサーバーは、WinPEベースのboot.inイメージの生成にのみ必要であり、導入シナリオでは使用されません。
DTK ドライバの解凍 DTK ファイルには、オペレーティングシステムを導入するサーバに必要なファームウェアバージョンが含まれています。
このタスクについて 注: WinPE ISO イメージの作成に最新バージョンの DTK を使用している間に、Dell EMC OpenManage Deployment Toolkit for Windows ファイルを使用します。Dell EMC OpenManage Deployment Toolkit for Windows ファイルには、オペレーティングシステムを導入するシステムに必要なファームウェアバージョンが含まれています。ファイルの最新バージョンを使用し、WinPE アップデートに Dell EMC OpenManage Deployment Toolkit Windows Driver Cabinet ファイルを使用しないでください。
手順 DTK 実行可能ファイルをダブルクリックします。 DTK ドライバを解凍するには、フォルダを選択します。 たとえば、C:\DTK501 などです。
解凍した DTK フォルダを共有フォルダにコピーします。 たとえば、\\Shareip\sharefolder\DTK\DTK501 などです。
注: SCVMM SP1 から SCVMM R2 にアップグレードしている場合は、Windows PowerShell 4.0 へのアップグレードが必要です。WinPE ISO イメージを作成します。
WinPE イメージのアップデート
このタスクについて 各 WinPE アップデートジョブには、一意のジョブ名が割り当てられます。
手順 で、WinPE アップデート を選択します。WinPE アップデート ページが表示されます。
イメージソース の カスタム WinPE イメージパス で、WinPE イメージパスとイメージが存在するファイル名を入力します。たとえば、\\Shareip\sharefolder\WIM\boot.wim などです。
DTK パス の下で、DTK ドライバパス に、Dell EMC Deployment Toolkit ドライバの場所を入力します。たとえば、\\Shareip\sharefolder\DTK\DTK501 などです。
出力ファイル の ISO または WIM ファイル名 には、WinPE イメージのアップデート後に生成されるファイルタイプとともにファイル名を入力します。次のいずれかの出力ファイルタイプを入力します。
SCCM 用 WIM ファイル SCVMM 用 ISO ファイル 資格情報プロファイル の下の、資格情報プロファイル に、WinPE イメージが保存されている共有フォルダへのアクセス権を持つ資格情報を入力します。(オプション)ジョブのリストを表示するには、ジョブリストに移動 を選択します。 各 Windows プレインストール環境(WinPE)アップデートに、固有のジョブ名が割り当てられています。
アップデート をクリックします。前のステップで指定したファイル名を持つ WinPE イメージは、\\shareip\sharefolder\WIM に作成されます。