Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OptiPlex 5000 Micro Service Manual

PDF

Removing optional I/O modules (Type C/HDMI/VGA/DP/Serial)

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the side cover.

About this task

The following images indicate the location of the optional I/O modules and provide a visual representation of the removal procedure.
NOTE:This is an example of the procedure and removal steps are applicable for optional I/O modules (Type C/HDMI/VGA/DP/Serial).

Removing optional I/O modules (Type C/HDMI/VGA/DP/Serial)

Remove the two (M3x3) screws that secure the optional I/O modules. Disconnect the I/O-module cable from the connector on the system board. Remove the I/O module from the computer.

Remove the two (M2x5) cross-type screws that secure the serial module to the computer chassis. Disconnect the I/O-module cable from the connector on the system board. Remove the I/O module from the computer.

Steps

  1. Remove the two (M3x3) screws that secure the optional I/O modules or two (M2x5) cross-type screws that secure the serial module to the computer chassis.
  2. Disconnect the I/O-module cable from the connector on the system board.
  3. Remove the I/O module from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\