Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 5055 Ryzen APU Tower Owner's Manual

Removing PCIe expansion card

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. Side Cover
    2. Front bezel
  3. Remove the Front panel door.
  4. To remove the PCIe expansion card:
    1. Pull the release latch to unlock the PCIe expansion card [1].
    2. Push the release tab [2] and lift the PCIe expansion card out of the computer [3].
      NOTE:The release tab is at the base of the expansion card.
      Figure displaying removing the expansion card
  5. Pull the release latch backward to open.
  6. Insert a screwdriver in the hole of a PCIe bracket and push hard to release the bracket [2], and then lift the bracket out from your computer.
    NOTE:To remove the PCIe brackets (2 and 4), push the bracket upwards from the inside of your computer to release it and then lift the bracket away from your computer.
  7. Repeat the steps to remove any additional PCIe expansion cards.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\