Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 5055 Ryzen APU Tower Owner's Manual

Removing power supply unit – PSU

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. Side Cover
    2. Front bezel
  3. Open the Front panel door.
  4. To release the PSU:
    1. Disconnect the PSU cables from the connectors on the system board [1, 2].
    2. Pull the clips to release the cables from the cable holders [3].
    3. Un-route the PSU cables from the cable holders [4].
    4. Remove the screws( 6+/-1) that secure the PSU to the computer [5].
      Figure displaying disconnecting the cables
  5. To remove the PSU:
    1. Press the release tab [1].
      NOTE:Release tab is at the base of the PSU
    2. Slide and lift the PSU away from the computer [2].
      Figure displaying removing the PSU

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\