Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

OptiPlex Tower 7010 Owner's Manual

Installing the 2.5-inch hard drive cage

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the 2.5-inch hard drive cage and provides a visual representation of the installation procedure.

Installing the 2.5-inch hard drive cage

Steps

  1. Align and place the second hard drive into the hard drive cage.
  2. Replace the two (M3x3.5) screws to secure the second hard drive to the hard drive cage.
  3. Align and place the first hard drive into the hard drive cage.
  4. Replace the two (M3x3.5) screws to secure the first hard drive to the hard drive cage.

Next steps

  1. Install the 2.5-inch hard-disk drive assembly.
  2. Install the side cover.
  3. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\