OptiPlex 7090 Small Form Factor Service Manual

PDF

Connection

This section provides connection details and settings.

Table 1. ConnectionConnection
Options	Description
Network Controller Configuration
Integrated NIC	This section allows the user to change the on-board LAN controller options. The options are as follows: Disabled - The internal LAN is off and not visible to the operating system. Enabled - The internal LAN is enabled. Enabled with PXE (Selected by defauly) - The internal LAN is enabled with PXE boot capabilities.
Wireless Device Enable	This section contains a toggle switch that allows the user to enable or disable WLAN and Bluetooth on the computer. The options are as follows: WLAN (Enabled by default). Bluetooth (Enabled by default).
Enable UEFI Network Stack	This section contains a toggle switch that allows the user to enable or disable installation of UEFI networking protocols. (ON by default)
Wireless Radio Control	This section contains a toggle switch that allows the user to enable or disable a feature where the system will sense a connection to a wired network and disable the WLAN or WWAN connection (OFF by default).
HTTP(s) Boot Feature
HTTP(s) Boot Feature	This section contains a toggle switch that allows the user to enable or disable HTTP(s) Boot capabilities (ON by default).
HTTP(s) Boot Modes	Auto Mode - HTTP(s) Boot automatically extracts Boot URL from DHCP(Dynamic Host Configuration Protocol) - Selected by default. Manual Mode - HTTP(s) Boot reads Boot URL provided by the user. This section also contains an "Upload" and "Delete" option for provisioning of the certificates required to connect to HTTPs Boot server.