Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

OptiPlex 7090 Small Form Factor Service Manual

Integrated Devices

This section provides Integrated Devices details and settings.
Table 1. Integrated Devices Integrated Devices
Options Description
Date/Time
Date

This section allows the user to change the date which takes effect immediately. The format used is MM/DD/YYYY.

Time

This section allows the user to change the time which takes effect immediately. The format used is HH/MM/SS in 24 hour format. The user also has an option to switch between 12-hours or 24-hours clock.

Audio
Enable Audio
This section contains a toggle switch that allows the user to enable or disable the audio on the computer. It also allows the user to:
  • Enable Microphone (Enabled by default.)
Serial Port
This section allows the user to set the Serial Port Configuration:
  • Disabled
  • COM1: Port is configured at 3F8h with IRQ4 (Selected by default)
  • COM2: Port is configured at F28h with IRQ3
  • COM3: Port is configured with 2E8h with IRQ4
USB Configuration
This section helps the user to make changes to the USB settings on the computer. The options available are as follows(All options are enabled by default):
  • Enable Front USB Ports
  • Enable Rear USB Ports
  • Enable USB Boot Support
Front USB Configuration
This section allows the user to manually enable the 4 USB ports on the front bezel (All USB ports are enabled by default.). The options are:
  • Front Port 1 (Bottom Left)
  • Front Port 2 (Bottom Right)
  • Front Port 3 (Top Left)
  • Front Port 4 (Top Right)
Rear USB Configuration
This section allows the user to manually enable the 4 USB ports on the back (All USB ports are enabled by default.). The options are:
  • Rear Port 1 (Top Left)
  • Rear Port 2 (Left Middle)
  • Rear Port 3 (Bottom Left)
  • Rear Port 4 (Bottom Right)
  • Rear Port 4 (Middle Right)
  • Rear Port 4 (Top Right)
Dust Filter Maintenance
This field enabled or disabled BIOS messages for maintaining the optional dust filter. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the following time intervals:
  • Disabled (selected by default)
  • 15 days
  • 30 days
  • 60 days
  • 90 days
  • 120 days
  • 150 days
  • 180 days

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\