OptiPlex 7090 Small Form Factor Service Manual

Storage

This section provides storage details and settings.

Table 1. Storage Storage options
Options	Description
SATA Operation
SATA Operation	This section allows the user to select the operating mode of the integrated SATA hard drive controller. The following options are available: Disabled - SATA controllers are disabled. AHCI - SATA is configured in AHCI mode. RAID On - SATA is setup to support RAID (Intel Rapid Storage Technology). (Selected by default)
Storage Interface
Port Enablement	This section allows the user to enable or disable the onboard drives on the computer. The following options is available (ON by default). SATA-0 SATA-1 SATA-3 M.2 PCIe SSD-0 M.2 PCIe SSD-1
SMART Reporting
Enable SMART Reporting	This section contains a toggle switch that allows the user to enable or disable the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting Technology) option on the system (OFF by default).
Drive Information	This section provides information about the connected and active drives on the computer. The following options are available: M.2 PCIe SSD-0 Type Device
Enable MediaCard	This section allows setting the media cards ON/OFF or enable/disable media card in read-only state. The following options are available: Secure Digital (SD) Card (Enabled by default) Secure Digital (SD) Card Read-Only Mode