Dell PowerEdge RAID Controller 12 User’s Guide PERC H965i Adapter, PERC H965i Front, PERC H965i MX, and PERC H965e Adapter

Convert a physical disk to a non–RAID disk

To convert a physical disk to non–RAID disk from the HII Configuration Utility, perform the following steps:

1. Enter the Dell PERC 12 Configuration Utility. See Enter the PERC 12 HII Configuration Utility.
2. Click Main Menu > Device Management > Logical Enclosure <enclosure Number>. An enclosure number can be 0, 1, 2, 3, 4, and so on.
   All the physical disks associated with the selected enclosure are listed.
3. Select the physical disk.
4. From the Operations list, select Convert to non-RAID Capable.
5. Click Go.
6. When prompted to indicate if you want to covert the selected PDs to non-RAID types, select the Confirm check box, and then click Yes.
   The PDs are converted to non-RAID PDs.