Dell PowerEdge RAID Controller 12 User’s Guide PERC H965i Adapter, PERC H965i Front, PERC H965i MX, and PERC H965e Adapter

View battery (Energy Pack) properties

1. Enter the Dell PERC 12 Configuration Utility. See See Enter the PERC 12 HII Configuration Utility.
2. Click Main Menu > Energy Pack Management.
   The battery (Energy Pack) and capacity information are displayed.
3. You can view the following properties of the battery (Energy Pack):

   Table 1. Battery (Energy Pack) propertiesThis table displays the properties of battery (Energy Pack).

   Field	Description
   Type	Displays the type of battery.
   Status	Displays the current status of the battery.
   Manufacturer	Displays the manufacturer of the battery.
   Module Version	Displays the version of the module.
   Design Capacity (mAh)	Displays the size of the battery.
   Temperature (C)	Displays the current temperature of the battery and also indicates whether the temperature is normal or high.
   Voltage (mV)	Displays whether the voltage status of the battery is normal or high.

4. To set advanced properties click Advanced.

   Table 2. Advanced battery (Energy Pack) propertiesThis table displays the advanced battery (Energy Pack) properties.

   Field	Description
   Full capacity	Displays the maximum charge capacity of the battery.
   Remaining capacity	Displays the current charge capacity of the battery.
   Charge %	Displays the available charge of the battery in percentage.
   Current (mA)	Displays power consumption of the battery in milliamps (mA).
   Charge Cycle Count	Displays the number of times the battery is charged or discharged.
   Auto-learn mode	Displays the condition of the battery.
   Next Learn Cycle Time	Displays the next schedule of the auto learn cycle time.

5. To start a manual learning process, click Start Manual Learn Cycle.