Dell EMC SmartFabric OS10 User Guide Release 10.5.1

Configure a loopback interface

RESTCONF endpoint

/restconf/data/interfaces

JSON content

{
  "interface": [{
    "type": "iana-if-type:softwareLoopback",
    "enabled": true,
    "description":"loopback interface",
    "name":"loopback1"}]
}

Parameters

• type string —Enter iana-if-type:softwareLoopback for a loopback interface.

• enabled bool— Enter true to enable the interface; enter false to disable.

• description string — Enter a text string to describe the interface. A maximum of 80 alphanumeric characters.

• name string — Enter loopback loopback-id of the interface, loopback-id is from 0 to 16383.

Example

curl -X POST  -k -u admin:admin "https://10.11.86.113/restconf/data/interfaces" 
-H "accept: application/json" -H "Content-Type: application/json" 
-d '{"interface": [{"type": "iana-if-type:softwareLoopback", "enabled": true, 
"description":"loopback interface", "name":"loopback1"}]}'

Configure a loopback interface IP address

RESTCONF endpoint

/restconf/data/interfaces/interface/loopback1

JSON content

{
  "dell-ip:ipv4":{
    "address": {
      "primary-addr":"6.6.6.6/24"
    }
  }
}

Parameters

• primary-addr ip-address/prefix-length — Enter the loopback IP address in dotted-decimal A.B.C.D/x format.

Example

curl -X POST  -k -u admin:admin "https://10.11.86.113/restconf/data/interfaces/interface/loopback1" 
-H "accept: application/json" -H "Content-Type: application/json" 
-d '{"dell-ip:ipv4":{"address": {"primary-addr":"6.6.6.6/24"}}}'