show evpn mac {count | mac-address
nn.nn.nn.nn | evi
id [mac-address
nn.nn.nn.nn | count | next-hop
ip-address count]}
Parameters
count — Displays the total number of local and remote host MAC addresses in EVPN instances.
mac-address
nn.nn.nn.nn — Displays the BGP EVPN routes for a specific 48-bit host MAC address.
evi
id — Displays the host MAC addresses and next hops in a specified EVPN instance, from 1 to 65535. To filter the output, display information on the host MAC address count for an EVPN ID or for a next-hop IP address, and BGP routes for a specified MAC address.
Default
Not configured
Command mode
EXEC
Usage information
Use this command to display the BGP routes for host MAC addresses in EVPN instances. The type 2 routes received from the remote VTEP is displayed only if there is a corresponding EVI configured locally.
Examples
OS10# show evpn mac
Type -(lcl): Local (rmt): remote
EVI Mac-Address Type Seq-No Interface/Next-Hop
50 00:00:00:aa:aa:aa rmt 0 55.1.1.3
OS10# show evpn mac count
Total MAC Entries :
Local MAC Address Count : 2
Remote MAC Address Count : 5
OS10# show evpn mac evi 811 count
EVI 811 MAC Entries :
Local MAC Address Count : 1
Remote MAC Address Count : 2
OS10# show evpn mac evi 811 next-hop 80.80.1.8 count
EVI 811 next-hop 80.80.1.8 MAC Entries :
Remote MAC Address Count : 2
Supported releases
10.4.2.0 or later
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\