vni
Associates an EVPN instance with a VXLAN VNI or configures a VXLAN VNI to use for L3 EVPN symmetric IRB traffic.
- Syntax
- vni
vni
- Parameters
-
- vni
- Enter a VXLAN virtual-network ID, from 1 to 16,777,215.
- Default
- Not configured
- Command mode
- EVPN-EVI and EVPN-VRF
- Usage information
- Use this command:
- In EVPN-EVI mode to configure an EVPN instance with RD and RT values for an overlay VXLAN virtual network.
- In EVPN-VRF mode to configure a unique VXLAN VNI for EVPN symmetric IRB traffic in a tenant VRF.
- Example
-
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)# vni 10000
OS10(config)# evpn
OS10(config-evpn)# vrf vrf-blue
OS10(config-evpn-vrf-vrf-blue)# vni 65536
- Supported releases
- 10.5.1 or later
Data is not available for the Topic