show mac address-table virtual-network
Displays the MAC addresses learned on all or a specified virtual network.
- Syntax
- show mac address-table virtual-network [vn-id | local | remote | static | dynamic | address mac-address | interface {ethernet node/slot/port:subport | port-channel number}]
- Parameters
- vn-id
- Display only information about the specified virtual network.
- local
- Display only locally learned MAC addresses.
- remote
- Display only remote MAC addresses.
- static
- Display only static MAC addresses.
- dynamic
- Display only dynamic MAC addresses.
- address mac-address
- Display only information about the specified MAC address. Enter the MAC address in EEEE.EEEE.EEEE format.
- interface ethernet node/slot/port[:subport]
- Display only MAC addresses learned on the specified interface.
- interface port-channel number
- Display only MAC addresses learned on the specified port channel.
- Default
- Not configured
- Command mode
- EXEC
- Usage information
- Use this command to verify the MAC addresses learned on VXLAN virtual networks. By default, MAC learning from a remote VTEP is enabled.
- Example
OS10# show mac address-table virtual-network
Virtual-Network VlanId MAC Address Type Interface/Remote-VTEP
----------------------------------------------------------------------
10000 00:00:00:00:00:11 dynamic ethernet1/1/31:1
10000 100 00:00:00:00:00:44 dynamic port-channel1000
10000 100 00:00:00:00:00:55 dynamic port-channel10
10000 00:00:00:00:00:77 dynamic VxLAN(32.1.1.1)
10000 100 34:a0:a0:a1:a2:f6 dynamic port-channel10
20000 300 00:00:00:00:00:22 dynamic port-channel100
20000 300 00:00:00:00:00:33 dynamic port-channel1000
20000 300 00:00:00:00:00:66 dynamic port-channel10
20000 00:00:00:00:00:88 dynamic VxLAN(32.1.1.1)
20000 300 34:a0:a0:a1:a2:f6 dynamic port-channel10
- Supported releases
- 10.4.2.0 or later
Data is not available for the Topic