Unisphere and Unisphere Central 2020 R1 Administrator's Guide

Configure SMTP Server Settings

The SMTP server settings must be configured to allow Unisphere Central to send notification emails.

1. If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
   The Unisphere CentralHome page is displayed.
2. Click Data Collector.
   The Data Collector view is displayed.
3. Click the Environment tab and, then click the SMTP Server subtab.
4. Click Edit.
   The SMTP Server Configuration dialog box opens.
5. Configure the SMTP server settings by performing the following steps:
   1. In the From Email Address field, type the email address to display as the sender of emails from the Data Collector.
   2. In the Host or IP Address field, type the host name or IP address of the SMTP server.
   3. If the port number of the SMTP server is not 25, type the correct port number in the Port field.
   4. If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the SMTP User Name and SMTP User Password fields.
6. Click OK.