Unisphere and Unisphere Central 2020 R1 Administrator's Guide

Modify an Access Filter for a Storage Center

Modify an access filter to change the users or IP addresses it allows.

1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere Central.
2. Click Summary.
   The Summary view is displayed.
3. Click (Settings).
   The Storage Center Settings dialog box opens.
4. Click the IP Filtering tab.
5. Select the access filter that you want to modify, then click Modify Filter.
   The Modify IP Filter dialog box opens.
6. Modify the access filter settings as needed. For user interface reference information, click Help.
7. (Optional) Modify the allowed Storage Center user or user privilege level.
   • To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from the drop-down menu.
   • To allow access to an individual Storage Center user, select Specific User, then select a user from the drop-down menu.
8. (Optional) Modify the allowed source IP addresses.
   NOTE If network address translation (NAT) is enabled in your network environment, be sure to specify the IP address(es) visible to the Storage Center.

   • To allow all source IP addresses, select All Hosts.
   • To allow access to a specific IP address, select Single IP Address, then type the IP address in the field.
   • To allow access to a range of IP addresses, select Range of IP Addresses, then type the first and last IP addresses in the fields.
9. Click OK.