Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.

Syntax [no] load-balance hg { ip-selection | ipv6-selection [ source-ip | source-ipv6 | source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [ source-mac | source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id | vlan | ethertype | source-dest-mac ] | tunnel [ ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}
Parameters
ip-selection | ipv6-selection [ source-ip | source-ipv6 | source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-module-id | protocol | vlan | L4-source-port | L4-dest-port ] To use IPv4 key fields in hash computation, enter the keyword ip-selection then one of the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-selection then one of the parameters.

  • source-ip — Use IPv4 src-ip field in hash calculation.

  • source-ipv6 — Use IPv6 src-ip field in hash calculation
  • source-port-id — Use src-port-id field in hash calculation.
  • source-module-id — Use src-module-id field in hash calculation.
  • dest-ip — Use IPv4 dest-ip field in hash calculation
  • dest-ipv6 — Use IPv6 dest-ip field in hash calculation
  • dest-port-id — Use dest-port-id field in hash calculation.
  • dest-module-id — Use dest-module-id field in hash calculation.
  • protocol — Use IPv4 protocol field in hash calculation.
  • vlan — Use vlan field in hash calculation.
  • L4-source-port — Use IPv4 L4-source-port field in hash calculation.
  • L4-dest-port — Use IPv4 L4-dest-port field in hash calculation.
mac [ source-mac | source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id | vlan | ethertype | source-dest-mac ] To use MAC key fields in hash computation, enter the keyword mac then one of the parameters:
  • source-mac — Use source-mac field in hash calculation.
  • source-port-id — Use src-port-id field in hash calculation.
  • source-module-id — Use src-module-id field in hash calculation.
  • dest-mac — Use dest-mac field in hash calculation.
  • dest-port-id — Use dest-port-id field in hash calculation.
  • dest-module-id — Use dest-module-id field in hash calculation.
  • vlan — Use vlan field in hash calculation .
  • ethertype — Use Ethertype field in hash calculation.
  • source-dest-mac — Use SMAC and DMAC fields in hash calculation.
tunnel [ ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac ] To use tunnel key fields in hash computation, enter the keyword tunnel then one of the parameters:
  • ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash calculation.
  • ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in hash calculation.
  • mac-in-mac — Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\