Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip rip database

Display the routes that RIP learns. If the switch learned no RIP routes, no output is generated.

Syntax

show ip rip database [ ip-address mask]

Parameters

ip-address	(OPTIONAL) Specify an IP address in dotted decimal format to view RIP information on that network only. If you enter an IP address, also enter a mask for that IP address.
mask	(OPTIONAL) Specify a mask, in /network format, for the IP address.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip rip database command shown in the following example.

Field	Description
Total number of routes in RIP database	Displays the number of RIP routes stored in the RIP database.
100.10.10.0/24 directly connected	Lists the routes directly connected.
150.100.0.0 redistributed	Lists the routes learned through redistribution.
209.9.16.0/24...	Lists the routes and the sources advertising those routes.

Example

Dell#show ip rip database
                                             Total number of routes in RIP database: 1624
                                             204.250.54.0/24
                                             [50/1] via 192.14.1.3, 00:00:12, TenGigabitEthernet 0/1
                                             204.250.54.0/24     auto-summary
                                             203.250.49.0/24
                                             [50/1] via 192.13.1.3, 00:00:12, TenGigabitEthernet 0/1
                                             203.250.49.0/24     auto-summary
                                             210.250.40.0/24
                                             [50/2] via 1.1.18.2, 00:00:14, Vlan 18
                                             [50/2] via 1.1.130.2, 00:00:12, Port-channel 30
                                             210.250.40.0/24     auto-summary
                                             207.250.53.0/24
                                             [50/2] via 1.1.120.2, 00:00:55, Port-channel 20
                                             [50/2] via 1.1.130.2, 00:00:12, Port-channel 30
                                             [50/2] via 1.1.10.2, 00:00:18, Vlan 10
                                             207.250.53.0/24     auto-summary
                                             208.250.42.0/24
                                             [50/2] via 1.1.120.2, 00:00:55, Port-channel 20
                                             [50/2] via 1.1.130.2, 00:00:12, Port-channel 30
                                             [50/2] via 1.1.10.2, 00:00:18, Vlan 10
                                             208.250.42.0/24     auto-summary