Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip igmp interface

View information on the interfaces participating in IGMP.

Syntax show ip igmp interface [ interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear counters from a specified interface:
  • For a Port Channel interface, enter the keyword port-channel followed by a number. Range: 1-128

  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information.

  • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes
  • EXEC

  • EXEC Privilege

Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show ip igmp interface
                                             Vlan 2 is up, line protocol is down
                                             Inbound IGMP access group is not set
                                             Interface IGMP group join rate limit is not set
                                             IGMP snooping is enabled on interface
                                             IGMP Snooping query interval is 60 seconds
                                             IGMP Snooping querier timeout is 125 seconds
                                             IGMP Snooping last member query response interval is 1000 ms
                                             IGMP snooping fast-leave is disabled on this interface
                                             IGMP snooping querier is disabled on this interface
                                             Vlan 3 is up, line protocol is down
                                             Inbound IGMP access group is not set
                                             Interface IGMP group join rate limit is not set
                                             IGMP snooping is enabled on interface
                                             IGMP Snooping query interval is 60 seconds
                                             IGMP Snooping querier timeout is 125 seconds
                                             IGMP Snooping last member query response interval is 1000 ms
                                             IGMP snooping fast-leave is disabled on this interface
                                             IGMP snooping querier is disabled on this interface
                                             --More--
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\