Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

neighbor remote-as

Create and specify the remote peer to the BGP neighbor.

Syntax

neighbor { ipv6-address | peer-group-name} remote-as number

To delete a remote AS entry, use the no neighbor { ipv6-address | peer-group-name} remote-as number command.

Parameters

ipv6-address	Enter the IPv6 address in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name	Enter a text string up to 16 characters long as the name of the peer group.
number	Enter a number of the AS. The range is from 1 to 65535.

Defaults

Not configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

If the number parameter is the same as the AS number used in the router bgp command, the remote AS entry in the neighbor is considered an internal BGP peer entry.

This command creates a peer and the newly created peer is disabled ( shutdown).

Related Commands

router bgp — enters the ROUTER BGP mode and configure routes in an AS.