Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

area stub

Configure a stub area, which is an area not connected to other areas.

Syntax

area area-id stub [no-summary]

To delete a stub area, use the no area area-id stub command.

Parameters

area-id	Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535.
no-summary	(OPTIONAL) Enter the keywords `no-summary` to prevent the ABR from sending summary Link State Advertisements (LSAs) into the stub area.

Defaults

Disabled.

Command Modes

ROUTER OSPF

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To configure all routers and access servers within a stub, use this command.

Related Commands

router ospf — enters ROUTER OSPF mode to configure an OSPF instance.