Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

service-policy output

Apply an output policy map to the selected interface.

Syntax

service-policy output policy-map-name

To remove the output policy map from the interface, use the no service-policy output policy-map-name command.

Parameters

policy-map-name

Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist.

Defaults

none

Command Modes

INTERFACE

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A policy map attached to an interface can be modified.

Related Commands

policy-map-output — creates an output policy map.