Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip msdp cache-rejected-sa

Enable an MSDP cache for the rejected source-active entries.

Syntax

ip msdp cache-rejected-sa { number}

To clear the MSDP rejected source-active entries, use the no ip msdp cache-rejected-sa { number} command then the ip msdp cache-rejected-sa { number} command.

Parameters

number

Enter the number of rejected SA entries to cache. The range is from 0 to 32766.

Defaults

none

Command Modes

CONFIGURATION

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.3(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.
9.2(0.0)	Introduced on the MXL Switch .

Related Commands

show ip msdp sa-cache rejected-sa — Displays the rejected SAs in the SA cache.