Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

snmp ifmib ifalias long

Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters.

Syntax

snmp ifmib ifalias long

Defaults

Interface description truncated beyond 63 characters.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

!----command run on host connected to switch:------!
                                             > snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more
                                             IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a
                                             port connected to
                                             IF-MIB::ifAlias.134792448 = STRING:
                                             
                                             !----command run on Force10 switch:-----------!
                                             Dell#snmp ifmib ifalias long
                                             
                                             !----command run on server connected to switch:------!
                                             > snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more
                                             IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a
                                             port connected to Router2. This is a port connected to Router2. This is a port
                                             connected to Router2. This is a port connected to Router2.
                                             IF-MIB::ifAlias.134792448 = STRING: