Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

set metric-type

To assign a new route type for routes redistributed to OSPF, configure a filter.

Syntax

set metric-type {internal | external | type-1 | type-2}

Parameters

internal	Enter the keyword `internal` to assign the Interior Gateway Protocol metric of the next hop as the route’s BGP MULTI_EXIT_DES (MED) value.
external	Enter the keyword `external` to assign the IS-IS external metric.
type-1	Enter the keyword `type-1` to assign the OSPF Type 1 metric.
type-2	Enter the keyword `type-2` to assign the OSPF Type 2 metric.

Defaults

Not configured.

Command Modes

ROUTE-MAP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

set automatic-tag — computes the tag value of the route.

set metric — specifies the metric value assigned to redistributed routes.

set tag — specifies the tag assigned to redistributed routes.