Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip dhcp lease

Displays lease information about the dynamic IP address currently assigned to a DHCP client-enabled interface.

Syntax

show ip dhcp lease[interface type slot/ port]

Parameters

interface type slot/port

Display DHCP client statistics on the specified interface.

For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/port information. The slot and port range is 0.
For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Default

Display DHCP lease information on all DHCP client-enabled interfaces on the switch.

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.