Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

distribute-list in

Filter network prefixes received in updates.

Syntax

distribute-list prefix-list-name in [ interface]

To return to the default values, use the no distribute-list prefix-list-name in [ interface] command.

Parameters

prefix-list-name	Specify the prefix list to filter prefixes in routing updates.
interface	(OPTIONAL) Identifies the interface type slot/port as one of the following: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information. For a VLAN, enter the keyword `vlan` then a number from 1 to 4094.

Defaults

Not configured.

Command Modes

ROUTER ISIS ( for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6)

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

distribute-list out — suppresses networks from being advertised in updates.
redistribute — redistributes routes from one routing domain to another routing domain.