Latitude 7290 Owner's Manual

Installing speaker module

1. Place the speaker module into the slots on the system.
2. Replace the four (M2.0 x 3.0) screws to secure the speaker to the system.
3. Route the speaker cable through the retention clips on the system.
   NOTE Speaker cables are routed below the securing latch on the palm-rest and tucked below the touchpad buttons bracket using tape.
4. Connect the speaker cable to the connector on the system board.
5. Connect the battery cable to the connector on the system board.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.