Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Latitude 7290 Owner's Manual

PDF

Power management screen options

Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.

Default setting: Wake on AC is not selected.

Enable Intel Speed Shift Technology
This option is used to enable or disable Intel speed shift technoloy.

Default setting: Enable Intel Speed Shift Technology is enabled.

Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
  • Disabled
  • Every Day
  • Weekdays
  • Select Days

Default setting: Disabled

USB Wake Support
Allows you to enable USB devices to wake the system from Standby.
NOTE This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power.
  • Enable USB Wake Support
  • Wake on Dell USB-C dock

Default setting: The option is disabled.

Wireless Radio Control
Allows you to enable or disable the feature that automatically switches from wired or wireless networks without depending on the physical connection.
  • Control WLAN Radio
  • Control WWAN Radio

Default setting: The options are disabled.

Wake on WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal.
  • Disabled
  • LAN Only
  • WLAN Only
  • LAN or WLAN
  • Disabled
  • WLAN

Default setting: Disabled

Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.

Block Sleep (S3 state)

Default setting: This option is disabled

Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After you enable this option, your system runs only in battery even if the AC is attached.
  • Enable peak shift
  • Set battery threshold (15% to 100%) - 15 % (enabled by default)
  • Enable peak shift—is disabled
  • Set battery threshold (15% to 100%) - 15 % (enabled by default)
Advanced Battery Charge Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the standard charging algorithm and other techniques, during the nonwork hours to improve the battery health.

Disabled

Default setting: Disabled

Primary Battery Charge Configuration
Allows you to select the charging mode for the battery. The options are:
  • Adaptive—enabled by default
  • Standard—Fully charges your battery at a standard rate.
  • ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology This option is enabled by default.
  • Primarily AC use
  • Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option.
Type-C connector power
  • 7.5 Watts
  • 15 Watts—enabled by default

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\