- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Recommended tools
- Screw size list
- Subscriber identification module card
- Base cover
- Battery
- Solid state drive
- Speaker
- Coin cell battery
- WWAN card
- WLAN card
- Memory modules
- Heat sink
- LED board
- Touchpad buttons board
- Power connector port
- Display Assembly
- Touch display panel
- Display Bezel
- Nontouch display panel
- Camera Microphone Module
- Display Hinge Caps
- System board
- Keyboard
- Palm rest
- Technology and components
- System specifications
- System setup
- BIOS overview
- Entering BIOS setup program
- Navigation keys
- One time boot menu
- System setup options
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Intel software guard extensions screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Manageability
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- System logs screen options
- Admin and System password
- Updating the BIOS
- System and setup password
- Clearing CMOS settings
- Clearing BIOS (System Setup) and System passwords
- Software
- Troubleshooting
- Contacting Dell
Le damos la bienvenida
Le damos la bienvenida a Dell
Mi cuenta
- Realice pedidos rápida y fácilmente.
- Vea los pedidos y haga el seguimiento del estado del envío.
- Cree una lista de sus productos y acceda a ella
- Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Latitude 7290 Owner's Manual
Removing heat sink assembly
Heat sink assembly
comprises of heat sink and the system fan.
- Follow the procedure in Before working inside your computer.
- Remove the following:
- To remove the heat sink assembly:NOTE To identify the number of screws, see the screw list.
- Remove the 2 (M2.0 x 5.0)
screws that secure the system fan and the 4 (M2.0 x 3.0)
that secures the heat sink assembly to the system board [2].NOTE Remove the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.
- Lift and flip over the heat sink assembly from the system board.
- Disconnect the fan cable from the system board [1].
- Separate the heat sink assembly from the system.
- Remove the 2 (M2.0 x 5.0)
screws that secure the system fan and the 4 (M2.0 x 3.0)
that secures the heat sink assembly to the system board [2].
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Seleccione si el artículo le ha resultado útil o no.
Los comentarios no pueden contener caracteres especiales: <>()\