Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.

Latitude 7290 Owner's Manual

Installing heat sink assembly

Heat sink assembly comprises of heat sink and the system fan.
  1. Align the heat sink assembly with screw holders on the system board.
  2. Connect the fan cable to the connector on the system board.
  3. Replace the M2.0 x 3.0 screws to secure the heat sink assembly to the system board.
    NOTE Replace the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.
  4. Install the following:
    1. battery
    2. base cover
  5. Follow the procedure in After working inside your computer.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\