Active System Manager Release 8.1.1 User’s Guide

Adding Custom Bundle

Add Custom Bundle feature enables you to add bundle, consist of firmware compliance, to a imported catalogue. Previously you were only allowed to import catalogue, now on the top of it, you can even add bundle to catalogue which is enable you to compliance and update firmware when required. Perform the following task to do so:

Click Setting on Getting Started page.
Under Setting, click Repository
On Repository page, click Firmware.
Select a catalogue from the page, in which you want to add bundle. After that, Click Add Custom Bundleon top right corner of the same page .
An Add Custom Bundle window is displayed.
1. Enter the custom bundle’s name in Name field.
2. Enter the custom bundle’s description in Description field.
3. Enter the custom bundle’s version in Version field.
4. Select device type from Device Type drop-down menu.
  - NOTE: If you select switch from Device Type drop-down menu, version should include parenthesis. For example: 9.7(01).
5. Select device model from Device Model drop-down menu.
6. You can select priority either as Urgent, or Recommended or else Optional from Criticalitydrop-down menu.
7. Click Browse button beside Upload Firmware option. Browse and select firmware file, click Open.
8. Click Save.
After you perform the tasks, the firmware file will get uploaded with the bundle.

NOTE: If you do not want to add firmware file, then you can perform only compliance check.

NOTE: You cannot create a catalogue from scratched in ASM. You have to create a base catalogue in DRM tool and then you can upload that to ASM. You can select the uploaded catalogue and add bundles in it using Add Bundle feature.

Related concepts

Adding firmware repositories

Bienvenido

Bienvenido a Dell

Active System Manager Release 8.1.1 User’s Guide

Adding Custom Bundle

Califique este contenido