Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Active System Manager Release 8.1.1 User’s Guide

PDF

Deploying service

  • NOTE: You cannot deploy a service using a template that is in draft state. Publish the template before you use the template to deploy a service.

To deploy a service:

  1. In the left pane, click Services. The Services page is displayed.
  2. On the Services page, click Deploy New Service. The Deploy Service wizard is displayed.
  3. In the Service Information page, perform the following steps, and click Next.

    1. From the Select Template drop-down list, select the template to deploy a service.

    2. Enter the Service Name (required) and Service Description (optional) that identifies the service.

    3. If you want to update the firmware running on the servers that are part of the service, select Manage Server Firmware check box, and from the Use Firmware Repository drop-down, select a firmware repository.

      • NOTE: Changing the firmware repository could update the firmware level on servers for this service. Firmware on shared devices will still be maintained by the global default firmware repository.

    4. If you want to grant permission for Standard users to use this service, under Manage Service Permissions , select the In addition to all Admins, grant Standard Users access to this service check box, and perform one of the following actions:

      • To grant access to all Standard users for this service, select All Standard Users option.
      • To grant access only to specific Standard users for this service, select Specific Standard Users option, and perform the following tasks:

        1. Click Add User (s) to add one or more Standard users to the list.

          To remove the Standard user from the list, select the Standard user and click Remove User(s).

        2. After adding the Standard users, select or clear the check box next to the Standard users to grant or block access to the service.
  4. In the Deployment Settings page, configure hardware and OS settings. click Next. Configuring Hardware and Os Setting:
    1. Select server source from Server Source drop-down menu. you can select Server Pool or Manual Entry from Server Source drop-down menu.
    2. Select server pool from Server Pool drop-down menu. If you select Server Pool from Server Source drop-down menu, in that case you can view all user defined server pools along with the Global pool. Standard users can see only the pools that they have permission. If you select Manual Entry, instead of Server Pool, Choose Server drop-down menu will be displayed. From the Choose Server drop-down menu, you can manually select server with its service tag for deployment from the list under the Choose Server drop down menu.
    3. Under OS Settings section, From Management IP Source drop down menu, you can select ASM selected IP, Hostname DNS Lookup or Manual Entry. At the time of deployment, if you have set up network in advance and you have set up few template. Select ASM Selected IP , from Management IP Source drop-down menu. If you have DNS Setting in template of the deployed service, select Hostname DNS Lookup from Management IP Source drop-down menu. You can select Manual Entry option even from Management IP Source drop-down menu., If you select Manual Entry, Management IP Addressfield will be displayed. You can type IP adress which are available for use in Management IP Address field . The Manual Entry option is applicable only for Exsi and Hyper-V.
  5. In the Schedule Deployment page, perform one of the following actions:

    • Deploy Now — Select this option to deploy the service immediately.

    • Schedule Later — Select this option and enter the date and time to deploy the service.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"