Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Active System Manager Release 8.1.1 User’s Guide

PDF

Deploy Service

  • NOTE: You cannot deploy a service using a template that is in draft state. Publish the template before you use the template to deploy a service.
To deploy a service:

  1. In the left pane, click Services.

    The Services page is displayed.

  2. On the Services page, click Deploy New Service.

    The Deploy Service wizard is displayed.

  3. In the Service Information page, perform the following steps, and click Next.

    1. From the Select Template drop-down list, select the template to deploy a service.

    2. Enter the Service Name (required) and Service Description (optional) that identifies the service.

    3. If you want to update the firmware version running on the servers that are in the service, select the Manage Server Firmware check box, and from the Use Firmware Repository drop-down, select a firmware repository.

      • NOTE: Changing the firmware repository could update the firmware level on servers for this service. Firmware on shared devices will still be maintained by the global default firmware repository.

    4. If you want to grant permission for Standard users to use this service, under Manage Service Permissions , select the In addition to all Admins, grant Standard Users access to this service check box, and perform one of the following actions:

      • To grant access to all Standard users, select All Standard Users option
      • To grant access only to specific Standard users, select Specific Standard Users option, and perform the following tasks:

        1. Click Add User (s) to add one or more Standard users to the list.

          To remove a Standard user from the list, select the Standard user and click Remove User(s).

        2. After adding the Standard users, select or clear the check box next to the Standard users to grant or block access to the service.

  4. In the Deployment Settings page, configure the require settings, and click Next. click View All Details to view the details of the components that are part of the service

  5. In the Schedule Deployment page, perform one of the following actions:

    • Deploy Now — Select this option to deploy the service immediately.
    • Schedule Later — Select this option and enter the date and time to deploy the service.
  • NOTE: For C-Series sever deployment, network and BIOS configuration can not be done using appliance. You need to do it manually. You need to make sure that hard disk is available for server to install OS. You need to set single NIC to PXE boot. This should be set as first boot device and hard disk should be set as second boot device.

    You need to configure network on top of rack switch which are connected to C-Series server. You need to configure necessary VLAN on the service facing port of that top of rack switch. For that you need to place PXE VLAN-untagged for any kind of OS deployment. If it’s Windows and Linux bare metal OS installation, you need to set worklaod network and you need to set Hypervisor management network for ESXi deployment.

  • NOTE: Prior to deployment of FX2 or Blade server, you need to disable Flexadress every server in chassis. To disable Flexadress, follow the path:

    CMC > Server Overview > Setup > FlexAddress.

    You need to make sure that server is powered down to disable FlexAddress. Ideally these should be done prior discovering the server.

Related concepts

Viewing Service Details

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"