Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Active System Manager Release 8.1.1 User’s Guide

PDF

Server settings

Target Boot Device

Description
Hardware Settings

Target Boot Device

Specifies the target boot device ( for example: Local Hard Drive or SD card).

RAID

You can configure RAID using this feature. Two options are there to configure RAID Level:
  • Basic RAID Level
  • Advanced RAID Configuration

Basic RAID Level: Select Basic RAID Level option, and then select RAID level from the Basic RAID Level drop-down menu.

ASM supports external and internal RAID controllers via the Advanced RAID Configuration feature.

Advanced RAID Configuration: If you select Advanced RAID Configuration, You will get two buttons Add Internal Virtual Disks , Add External Virtual Disk. There are four settings under Add Internal Virtual Disks, Add External Virtual Disk:

  • Virtual Disk: Lists the ID number of the virtual disk..
  • RAID Level: Select RAID level from RAID Level Drop-down menu.
  • # of Disks: Select number of disk according to the selected RAID level. You may specify "Minimum" or "Exactly" to determine whether ASM should create the virtual disk with the exact number of drives or use as many drives as available.
    • NOTE: If the number of selected disk is not correct for the chosen RAID level, template validation won't allow you to procede further.
  • Disk Type: Select disk type from the drop-down menu.You can chose Any Available, Require HDD, or Require SDD. to specify the type of drives to be selected for the virtual disk. Note that a virtual disk cannot be created with a mix of SSD and HDD.
There is feature, Enable Global Hotspares. This option is available for both Add Internal Virtual Disk and Add External Virtual Disk. By using this feature you can specify number of hotspares you want to set for disk.
  • NOTE: ASM supports MD1400 and manages MD1400DAS through second RAID Controller. ASM provides the ability to configure a second RAID controller to support the MD 1400 external storage array. In order to support this you must have a second PERC device in your system. It is recommended to use the PERC H830 storage controller with the MD 1400.

System Profile 

Select the system power and performance profile for the server.

User Accessible USB Ports  

Enables or disables the user accessible USB ports.

Number of Core Processors

Specifies the number of enabled cores per processor.

Processor Virtualization Technology

If this is enabled, the additional hardware capabilities provided by virtualization technology are enabled.

Logical Processors

Each processor core supports up to two logical processors. If enabled, the BIOS reports all logical processors. If disabled, the BIOS reports only one logical processor per core.

Memory Node Interleaving

If the system is configured with matching memory, enables memory node interleaving. If disabled the system supports non-uniform memory architecture memory configurations.

Execute Disable

Enables or disable execute disable memory protection

Server Pool

Specifies the pool from which servers are selected for the deployment.

OS Settings

Auto-generate Host Name

Auto generate host name option is displayed on Server Component window for generating host name. If you already auto generated host name on Server Component window, Auto generate host name option will not be display.

  • If you select the Auto-generate Host Name check box, a Host Name Template field is displayed.
  • On Host Name Template field, type unique host name for deployment.

You must use variable while generating host name.

For Example: It can be service tag or Service tag+ Vendor+ Unique number. If you deselect Auto-generate Host Name check box, Host Name Template field will be disappeared.

  • NOTE: Auto- generate Host name feature is applicable for both the server, server(O/S Installation only) . In case of multiple instances of deployment, you have to select Auto- generate Host name option.
  • NOTE: When you have static assigned IP and if you have DNS configured in template, DNS use the IP to lookup the hostname and use it as hostname for the deployment.

OS Image

Specifies the target repository where the OS image install files are located. The default repositories are ESXi.  The additional repositories are shown if the user created them on the ASM appliance.

  • NOTE: You can select Red Hat Linux , Cent OS, Windows, Hyper-V, EXSi from OS Image Drop-down menu. It is upgraded with Linux 7, Cent OS 7 from this release.
  • NOTE: If you select an operating system from the OS Image drop down menu, the field NTP Server will be displayed.. This is an optional component for all operating systems except HyperV, but we highly recommend you to enter an NTP server IP in the field to ensure proper time synchronization with your environment and ASM appliance. In some cases when time is not properly synchronized, service deployment failure can occur.
  • NOTE: If you want to add more than one NTP server in the OS section of a server component, make sure to separate the IP addresses using comma (,).

Administrator password

Enter the administrator password that set on the installed OS.

Confirm administrator password

Enter to confirm the administrator password.

Install EqualLogic MEM

If the value is True, install EqualLogic Multipathing Extension Module.

Product Key

Specifies the product key to install the OS image on the server.

Timezone

Specifies the time zone of the server.

NTP Server

Specifies the IP address of the NTP server for time synchronization.

If you want to add more than one NTP server in the OS section of a server component, make sure to separate the IP addresses using comma (,).

Language

Specifies the language to be displayed in the installed operating system. That is, Windows operating system.

Keyboard

Specifies the key board language to be used during Windows installation.

Domain Name

Specifies the domain name to which you want to add the host. For example, aidev

FQ Domain Name

Specifies the Fully Qualified Domain Name (FQDN) to which you want to add the host. For example, aidev.com

Domain Admin Username

Specifies the username to access the domain.

Domain Admin Password

Specifies the admin password to add the host to the domain.

Domain Admin Password Confirm

Enables you to reconfirm the admin password to add the host to the domain.

Custom Installation OS Script

Refers to ASM maintained kickstart scripts or unattend.xml customer specific scripts to be used as a part of unattend OS install.

  • NOTE: After entering the information about PXE network in the respective field as described in the table above, ASM will untag vLANs entered by the user in the PXE network on the switch server facing port. In case of vMotion and Hypervisor network, for the entered information ASM will tag these networks on the switch server-facing ports. In case of Rack Server, ASM will configure those vLANs on TOR server facing ports (untag PXE vLANs, and tag other vLANs). In the case for Blade Servers, ASM will configure those vLANs on the IOM server facing ports (untag PXE vLANs and tag other vLANs).

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"