Dell Wyse Enhanced Windows Embedded Standard 7P forWyse 5060 Thin Client Administrator’s Guide

Configuring TightVNC Server Properties on the Thin ClientOptiplex Client

1. To open the TightVNC Server Configuration (offline) dialog box, click Start > Program > TightVNC Server (Application Mode) > TightVNC Server > Offline Configuration.
   TightVNC Server Configuration (offline) dialog box is displayed.
2. In the Server tab, set the Primary password or View-only password. Use this password while shadowing the thin clientOptiplex client.
   Default password is DELL.
3. In the Server tab, select the following check boxes:

   • Accept incoming connections

   • Require VNC authentication

   • Enable file transfers

   • Hide desktop wallpaper

   • Show icon in the notification area

   • Serve Java Viewer to web clients

   • Use mirror driver if available

   • Grab transparent windows.

4. In the Server tab , retain the following check boxes blank:

   • Block remote input events

   • Block remote input on local activity

   • No local input during client sessions.

5. In the Main server port box, select or type 5900.
6. In the web access port box, select or type 5800.
7. In the Screen poling cycle box, select or type 1000.
8. Click OK.
   NOTE:

   For security, it is highly recommended that the Primary Password be changed for administrator use only immediately upon receipt of the Thin ClientOptiplex Client.