Dell EMC PowerEdge RAID Controller S130 User’s Guide

Changing the boot order of the virtual disks

1. Enter the Dell PERC S130 Configuration Utility. See Entering the DELL PERC S130 Configuration Utility.
2. Click Controller Management > Change Controller Properties.
   NOTE: While swapping boot virtual disks, ensure that the boot virtual disks are created from disk drives populated across slots 0-3 of the system. For information about the disk connectivity for AHCI devices, see Disk connectivity for AHCI devices, and for disks slot information, see the system specific Owner's Manual at dell.com/poweredgemanuals.
3. Click the link Set Bootable Device.
   A Change Order dialog box displays the list of virtual disks available.
4. Use the arrow keys to set a virtual disk and + or – to change the order of the virtual disks that need to be booted first.
5. Click Ok.
   The changes to the boot order of the virtual disks are displayed.