Dell EMC PowerEdge RAID Controller S130 User’s Guide

Swapping two virtual disks

1. Enter the BIOS Configuration Utility. See Entering the BIOS Configuration Utility.
2. In the Main Menu screen, select the Swapping Two Virtual Disks and press <Enter>.
   NOTE: While swapping boot virtual disks, ensure that the boot virtual disks are created from disk drives populated across slots 0-3 of the system. For information about the disk connectivity for AHCI devices, see Disk connectivity for AHCI devices, and for disks slot information, see the system specific Owner's Manual at dell.com/poweredgemanuals.
3. Use the arrow keys to highlight a virtual disk at the Virtual Disk field. Press <Insert>.
4. Use the arrow keys to highlight another virtual disk. Press <Insert>.
5. Press <Enter> to swap the virtual disks.
   NOTE: Only two virtual disks can be swapped at a time.

   NOTE: When you create up to 10 virtual disks and swap the virtual disks using the BIOS Configuration Utility, the order of the virtual disk in option ROM (OPROM) appear different from the order of the virtual disk in operating system.