- Notes, cautions, and warnings
- Working inside your computer
- Removing and installing components
- Device drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
Inspiron 7490 Service Manual
Removing the base cover
Prerequisites
- Follow the procedure in before working inside your computer.
About this task
The following image indicates the location of the base cover and provides a visual representation of the removal procedure.
Steps
- Loosen the three captive screws on the base cover.
- Remove the six screws (M2x3.5) that secure the base cover to the palm-rest assembly.
- Using a plastic scribe, pry the base cover starting from the top-left corner of the palm-rest assembly.
- Lift the base cover off the palm-rest assembly.
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\