Preskočiť na hlavný obsah
  • Zadávajte objednávky rýchlo a jednoducho
  • Pozrite si svoje objednávky a sledujte priebeh doručenia
  • Vytvorte si zoznam svojich produktov a majte ho vždy poruke
  • Spravujte svoje lokality Dell EMC, produkty a kontaktné informácie na úrovni produktov pomocou Správy informácií o spoločnosti.

Latitude 5540 Owner's Manual

Removing the power button

CAUTION:The information in this section is intended for authorized service technicians only.

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the SIM card.
  3. Remove the base cover.
  4. Remove the battery.
  5. Remove the 4G WWAN card or 5G WWAN card, as applicable.
  6. Remove the WLAN card.
  7. Remove the memory modules.
  8. Remove the M.2 2230 or M.2 2280 solid-state drive from Slot 1, as applicable.
  9. Remove the M.2 2230 solid-state drive from Slot 2, if applicable.
  10. Remove the heat sink (discrete GPU) or heat sink (integrated GPU), as applicable.
  11. Remove the assembly-inner frame.
  12. Remove the system board.

About this task

The following images indicate the location of the power button and provide a visual representation of the removal procedure.
Image: Removing the power button

Steps

  1. Remove the two (M2x2.5) screws that secure the power button to the palm-rest assembly.
  2. Lift the power button off the palm-rest assembly.

Ohodnotiť tento obsah

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
0/3000 characters
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, či vám článok pomohol alebo nie.
  Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\