Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

boot system stack-unit

Specify the location of the Dell Networking OS image to be used to boot the system.

Syntax

boot system stack-unit < 0-5 | all> {default | primary | secondary}

Parameters

0-5	Enter the stack member unit identifier of the stack member.
all	Enter the keyword `all` to set the primary, secondary, and default images for the system.
default	Enter the keyword `default` to set the default image path for the system.
primary	Enter the keyword `primary` to set the primary image path for the system.
secondary	Enter the keyword `secondary` to set the secondary image path for the system.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.17.0	Supported on the M I/O Aggregator.
9.4(0.0)	Supported on the FN I/O aggregator.

Usage Information

The system first attempts to load the image from the primary path. If it fails to boot, the system tries to load the image from the secondary path and if that also fails, the system loads the default image.