Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show config (from INTERFACE VLAN mode)

Displays the current configuration of the Default VLAN.

Syntax

show config

Command Modes

INTERFACE VLAN

Supported Modes

All Modes

Command History

Version	Description
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell(conf-if-vl-1)#show config
                                             !
                                             interface Vlan 1
                                             description a
                                             no ip address
                                             mtu 2500
                                             shutdown
                                             Dell(conf-if-vl-1)#