Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

active-zoneset

Activate the zoneset.

Syntax

active-zoneset zoneset_name

To change to the default zone behavior, use the no active-zoneset zoneset_name command.

Parameters

zoneset_name

Enter the zoneset name.

Command Modes

FC FABRIC CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0)	Introduced on the S5000.

Example

Dell(conf)# fcoe-map default_full_fabric
                                             Dell(conf-fcoe-default_full_fabric)# fc-fabric
                                             Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset zs1

Related Commands

show fc zoneset — displays the configured and active zoneset.