Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show dot1x interface

Display the 802.1X configuration of an interface.

Syntax show dot1x interface interface [mac-address mac-address]
Parameters
interface Enter one of the following keywords and slot/port or number information:
  • For a Ten-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
mac-address (Optional) MAC address of a supplicant.
Defaults none
Command Modes
  • EXEC
  • EXEC privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information

If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details (Port Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) are displayed for each supplicant, as shown in the following example.

Example
Dell#show dot1x interface tengigabitethernet 0/1
                                             
                                             802.1x information on Te 0/1:
                                             -----------------------------
                                             Dot1x Status:             Enable
                                             Port Control:             AUTO
                                             Port Auth Status:         AUTHORIZED(MAC-AUTH-BYPASS)
                                             Re-Authentication:        Disable
                                             Untagged VLAN id:         400
                                             Guest VLAN:               Enable
                                             Guest VLAN id:            100
                                             Auth-Fail VLAN:           Disable
                                             Auth-Fail VLAN id:        NONE
                                             Auth-Fail Max-Attempts:   NONE
                                             Mac-Auth-Bypass:          Enable
                                             Mac-Auth-Bypass Only:     Enable
                                             Tx Period:                3 seconds
                                             Quiet Period:             60 seconds
                                             ReAuth Max:               2
                                             Supplicant Timeout:       30 seconds
                                             Server Timeout:           30 seconds
                                             Re-Auth Interval:         3600 seconds
                                             Max-EAP-Req:              2
                                             Host Mode:                SINGLE_HOST
                                             Auth PAE State:           Authenticated
                                             Backend State:            Idle
                                             Dell#
                                             
                                             Dell#show dot1x interface tengigabitethernet 0/1 mac-address 00:00:00:00:00:10
                                             Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
                                             
                                             802.1x information on Te 0/1:
                                             -----------------------------
                                             Dot1x Status:             Enable
                                             Port Control:             AUTO
                                             Re-Authentication:        Disable
                                             Guest VLAN:               Enable
                                             Guest VLAN id:            100
                                             Auth-Fail VLAN:           Disable
                                             Auth-Fail VLAN id:        NONE
                                             Auth-Fail Max-Attempts:   NONE
                                             Mac-Auth-Bypass:          Enable
                                             Mac-Auth-Bypass Only:     Enable
                                             Tx Period:                3 seconds
                                             Quiet Period:             60 seconds
                                             ReAuth Max:               2
                                             Supplicant Timeout:       30 seconds
                                             Server Timeout:           30 seconds
                                             Re-Auth Interval:         3600 seconds
                                             Max-EAP-Req:              2
                                             Host Mode:                MULTI_AUTH
                                             Max-Supplicants:          128
                                             
                                             Port status and State info for Supplicant: 00:00:00:00:00:10
                                             
                                             Port Auth Status:         AUTHORIZED(MAC-AUTH-BYPASS)
                                             Untagged VLAN id:         400
                                             Auth PAE State:           Authenticated
                                             Backend State:            Idle
                                             Dell#
                                             
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\