Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

snmp-server group

Configure a new SNMP group or a table that maps SNMP users to SNMP views.

Syntax

snmp-server group [ group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write name] [notify name] [ access-list-name | access-list-name]]

To remove a specified group, use the no snmp-server group [ group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [ access-list-name | access-list-name]] command.

Parameters

group_name	Enter a text string (up to 20 characters long) as the name of the group. The following groups are created for mapping to read/write community/security-names (defaults): `v1v2creadg` — maps to a community/security-name with `ro` permissions. `1v2cwriteg` — maps to a community/security-name `rw` permissions.
1 \| 2c \| 3	(OPTIONAL) Enter the security model version number ( `1`, `2c`, or `3`): `1` is the least secure version. `3` is the most secure of the security modes. `2c` allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. The default is 1.
auth	(OPTIONAL) Enter the keyword `auth` to specify authentication of a packet without encryption.
noauth	(OPTIONAL) Enter the keyword `noauth` to specify no authentication of a packet.
priv	(OPTIONAL) Enter the keyword `priv` to specify both authentication and then scrambling of the packet.
read name	(OPTIONAL) Enter the keyword `read` then a name (a string of up to 20 characters long) as the read view name. The default is GlobalView and is assumed to be every object belonging to the internet (1.3.6.1) OID space.
write name	(OPTIONAL) Enter the keyword `write` then a name (a string of up to 20 characters long) as the write view name.
notify name	(OPTIONAL) Enter the keyword `notify` then a name (a string of up to 20 characters long) as the notify view name.
access-list-name	(Optional) Enter the standard IPv4 access list name (a string up to 16 characters long).

Defaults

As above.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following Example specifies the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview.

NOTE: The number of configurable groups is limited to 16 groups.

Example

Dell#conf
                                             Dell(conf)# snmp-server group harig 3 priv read rview
                                             Dell#

Related Commands

show snmp group — displays the group name, security model, view status, and storage type of each group.

show running-config — displays the SNMP running configuration.