Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show dot1x cos-mapping interface

Display the CoS priority-mapping table the RADIUS server provides and applies to authenticated supplicants on an 802.1X-enabled system.

Syntax show dot1x cos-mapping interface interface [mac-address mac-address]
Parameters
interface Enter one of the following keywords and slot/port or number information:
  • For a Ten-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
mac-address (Optional) MAC address of an 802.1X-authenticated supplicant.
Defaults none
Command Modes
  • EXEC
  • EXEC privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information

To display CoS mapping information only for the specified supplicant, enter a supplicant’s MAC address using the mac-address option.

You can display the CoS mapping information applied to traffic from authenticated supplicants on 802.1X-enabled ports that are in Single-Hot, Multi-Host, and Multi-Supplicant authentication modes.

Example
Dell#show dot1x cos-mapping interface tengigabitethernet 0/1
                                             
                                             802.1p CoS re-map table on Te 0/1:
                                             ----------------------------------
                                             Dot1p        Remapped Dot1p
                                             0            7
                                             1            6
                                             2            5
                                             3            4
                                             4            3
                                             5            2
                                             6            1
                                             7            0
                                             Dell#
                                             
                                             Dell#show dot1x cos-mapping interface tengigabitethernet 0/1 mac-address 00:00:00:00:00:10
                                             Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
                                             
                                             802.1p CoS re-map table on Te 0/1:
                                             ----------------------------------
                                             
                                             802.1p CoS re-map table for Supplicant: 00:00:00:00:00:10
                                             
                                             Dot1p        Remapped Dot1p
                                             0            7
                                             1            6
                                             2            5
                                             3            4
                                             4            3
                                             5            2
                                             6            1
                                             7            0
                                             Dell#
                                             
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\